HPE FlexNetwork 5140 24G PoE+ 4SFP+ HI Switch R9L63AR RENEW
Provedení:Rack mounted 19"; Funkce:L2+L4, L3; Technologie:Gigabit Ethernet + 10 GbE porty; Počet portů LAN:24; Počet portů LAN:24; Podporované standardy PoE:802.3at; Počet PoE Out portů:24; Počet PoE Out portů:24; Počet SFP portů:8; Počet SFP portů:8; Počet SFP+ portů:4; Počet SFP+ portů:4; Počet portů SFP28:0; Počet portů SFP28:0; Počet portů QSFP28:0
Podrobnosti
HPE FlexNetwork 5140 24G PoE+ 4SFP+ HI Switch R9L63AR RENEW
Generic |
IEC 61000-4-1:2006; IEC 61000-4-2:Ed2 2008; IEC 61000-4-3:2020; IEC 61000-4-3:2010; IEC 61000-4-4:2004; IEC 61000-4-4:2011; IEC 61000-4-4:Ed3.0 2012; IEC 61000-4-5:2014; IEC 61000-4-5:2017; IEC 61000-4-6:2013; IEC 61000-4-6:2013 COR1:2015; IEC 61000-4-8:2009; IEC 61000-4-11:2004; IEC 61000-4-11:2017; IEC 61000-4-11:2020 |
|
ESD |
Air 8KV; Con 6KV; Criteria B |
|
Inmunity |
ETSI EN300 386 V1.6.1 (2012-09); ETSI EN 300 386 V2.1.1 (2016-07); EN 55035:2017; CISPR 35:2016; |
|
Management |
IMC-Intelligent Management Center; Smart MC, command-line interface; SNMP Manager |
|
Services |
Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
|
HPE FlexNetwork 5140 24G PoE+ 4SFP+ HI Switch (R9L63A) |
||
I/O ports and slots |
24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+), |
|
4 SFP+ 10GbE ports 1 port expansion module slot |
||
Additional ports and slots |
1 dual-personality (RJ-45 or mini-USB) serial console port 1 RJ-45 out-of-band management port 1 USB 2.0 |
|
Power supplies |
2 power supply slots 1 minimum power supply required |
|
Fan tray |
Airflow direction is from side to back |
|
Physical characteristics |
Dimensions |
17.32(w) x 18.11(d) x 1.71(h) in. (44.00 x 46.00 x 4.36 cm) (1U height) |
Weight |
≤9.2 kg |
|
Memory and processor |
2 GB SDRAM; Packet buffer size: 4 MB, 512 MB flash |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) |
|
Performance |
1000 Mb Latency |
< 5 µs |
10 Gbps Latency |
< 3 µs |
|
Throughput |
180 Mpps |
|
Routing/Switching capacity |
288 Gbps |
|
Routing table size |
8K |
|
MAC address table size |
32K |
|
Environment |
Operating temperature |
23°F to 113°F (-5°C to 45°C) |
Operating relative humidity |
5% to 95%, noncondensing |
|
Non-operating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
|
Non-operating/Storage relative humidity |
5% to 95%, noncondensing |
|
Acoustic |
low speed fan: 57.2 dB, High speed fan: 68.9 dB. ISO 7779 |
|
Electrical characteristics |
Frequency |
50/60 Hz |
Maximum heat dissipation |
ranges from 105.7 BTU/hr to 3166 BTU/hr depending on power supply configuration |
|
Current |
20A |
|
Voltage |
100-240 VAC, rated (90-264 VAC, max)-48 to -60 VDC, rated (-36 to -72 VDC, max) (depending on power supply chosen) |
|
Maximum power rating |
928 W (dual AC) |
|
Idle power |
31 W (dual AC) |
|
PoE power |
720W (30W max PoE power per port) |
|
Notes: |
- Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated - PoE+ power range is from 360W to 740W. PoE+ power is the power supplied by the internal power supplies. It is dependent on the type and quantity of power supplies. Device supports 1 or 2 internal modular power supplies. |
|
Safety |
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2;IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; RoHS Compliance; AS/NZS 60950-1; GB 4943; EAC (EurAsian Conformity Certification) |
|
Emissions |
ETSI EN300 386 V1.6.1 (2012-09); ETSI EN 300 386 V2.1.1 (2016-07); EN 55032:2015 CLASS A; CISPR 32:2015 CLASS A; AS/NZS CISPR 32:2015 CLASS A; EN 61000-3-2:2014; EN 61000-3-3:2013; FCC PART15 Subpart B CLASS A; ICES-003 Issue 7 CLASS A; ANSI C63.4-2014; VCCI-CISPR 32:2016 CLASS A |
|
Generic |
IEC 61000-4-1:2006; IEC 61000-4-2:Ed2 2008; IEC 61000-4-3:2020; IEC 61000-4-3:2010; IEC 61000-4-4:2004; IEC 61000-4-4:2011; IEC 61000-4-4:Ed3.0 2012; IEC 61000-4-5:2014; IEC 61000-4-5:2017; IEC 61000-4-6:2013; IEC 61000-4-6:2013 COR1:2015; IEC 61000-4-8:2009; IEC 61000-4-11:2004; IEC 61000-4-11:2017; IEC 61000-4-11:2020 |
|
ESD |
Air 8KV; Con 6KV; Criteria B |
|
Management |
ETSI EN300 386 V1.6.1 (2012-09); ETSI EN 300 386 V2.1.1 (2016-07); EN 55035:2017; CISPR 35:2016; |
|
Services |
Refer to the Hewlett Packard Enterprise website at: http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
Technické parametry
- Provedení: Rack mounted 19"
- Funkce: L2+L4
- Funkce: L3
- Technologie: Gigabit Ethernet + 10 GbE porty
- Počet portů LAN: 24
- Počet portů LAN: 24
- Podporované standardy PoE: 802.3at
- Počet PoE Out portů: 24
- Počet PoE Out portů: 24
- Počet SFP portů: 8
- Počet SFP portů: 8
- Počet SFP+ portů: 4
- Počet SFP+ portů: 4
- Počet portů SFP28: 0
- Počet portů SFP28: 0
- Počet portů QSFP28: 0
- Počet portů QSFP28: 0
- Počet portů QSFP+: 0
- Počet portů QSFP+: 0
- Ventilátor: Ano
- Maximální počet portů: 24
- Počet PoE+ portů: 0
- Počet USB 2.0: 1
- Počet USB 2.0: 1
- Management: SNMP/RMON
- Vlastnosti switche: Rozšiřitelnost
- Maximální počet portů: 24
- Počet PoE+ portů: 0