HPE SERVERS

dl345g11

HPE ProLiant DL345 Gen11

Are you looking for a single-socket scalable server solution to power your virtualized data-intense, large-capacity storage workloads? The HPE ProLiant DL345 Gen11 server is a scalable 2U 1P solution that delivers exceptional compute performance and large capacity storage options at 1P economics. Powered by 4th Generation AMD EPYCTM Processors with up to 96 cores, increased memory bandwidth (up to 3 TB*), high-speed PCIe Gen5 I/O and EDSFF* storage, up to 20LFF/ 34SFF, and up to 4 GPUs* at the front, this server is a superb single-socket 2U solution for your data-intensive workloads. Enhanced security features with the HPE silicon root of trust are built into the firmware, creating a digital fingerprint for the AMD Secure Processor to validate safe operation prior to boot. The HPE DL345 Gen11 server provides impressive storage performance and options for data-intensive workloads like software-defined storage, video transcoding, and virtualized apps.

What's New:

  • Supports the 4th Generation AMD EPYCTM Processors that supports up to 96 cores, 400W, and 384MB of L3 Cache.
  • 12 DIMM channels per processor for up to 3TB* total DDR5 memory 4800MT/s.
  • Advanced data transfer rate and higher network speed from the PCIe Gen5 serial expansion bus
  • Includes HPE Integrated Lights-Out 6 (iLO 6) server management software
  • Supports hot-pluggable, high-availability RAID M.2 boot options.
  • Supports up to 6 PCIe x16 Gen5 expansion slots.
  • Supports 4LFF/8SFF Midtray and 2SFF/4LFF Rear Drvie bay.
  • Supports up to 36 EDSFF Drive bay*.
  • Supports up to 4x Single Width or 2x Double Width GPU cards at the front chassis*.

Form Factor

  • 2U rack

Chassis Types

  • 8 SFF with options for aditional 16 SFF front drive bay, 8 SFF midtray and 2 SFF rear drives to total 34 SFF drives.
  • 8 LFF with options for aditional 4 LFF front drive bay, 4LFF midtray and 4LFF rear drives to total 20 LFF drives.
  • 36 EDSFF* drive bay.
  • 4 Single Width or 2 Double Width GPUs* with 12 EDSFF* drive bay.

System Fans

Choice of Standard Fan Kit and Performance Fan kit. DL345 Gen11 supports up to 6 fans with fan redundancy built in. One fan rotor failure will place server in degraded mode but fully functional. Two fan rotor failures could provide warning and imminent server shutdown. Each Fan kits are designated to operate under different configuration. For more information, please refer to the Cooling option message in the Unique option section.

Processors - One of the following depending on model. For more information regarding AMD EPYC processors, please see the following: https://www.amd.com/en/products/epyc.

4th Gen AMD EPYC Processor

Cores

Base Frequency

Max Frequency

Max Memory

Wattage

Cache

Memory

EPYC 9174F

16

4.1 GHz

4.4 GHz

3TB

400W

256MB

4800MT/s

EPYC 9224

24

2.25 GHz

3.7 GHz

3TB

240W

64MB

4800MT/s

EPYC 9354P

32

2.85 GHz

3.7 GHz

3TB

300W

256MB

4800MT/s

EPYC 9374F

32

3.5 GHz

4.0 GHz

3TB

400W

256MB

4800MT/s

EPYC 9554P

64

3.1 GHz

3.75 GHz

3TB

400W

256MB

4800MT/s

EPYC 9654P

96

2.4 GHz

3.7 GHz

3TB

400W

384MB

4800MT/s

Notes:

- 6096pin LGA SP5 new socket type.

- 1MB L2/Core, Up to 32MB L3/CCD

- All 4th generation AMD EPYC processors can support up to 3TB of memory each under 1DPC, 12 channel per processor.

- 128 PCIe 5.0 Lanes

- 64 IO Lanes support CXL1.1+ with bifurcations supported down to x4

- The wattage information indicates the cTDP (Configurable TDP) of the processor.

Chipset No chipset - System on Chip (SoC) design.

On System Management Chipset

Memory One of the following depending on model

Type:

HPE DDR5 SmartMemory

Registered (RDIMM)

DIMM Slots Available

12

12 DIMM slots per processor, 12 channels per processor, 1 DIMMs per channel

Maximum capacity (RDIMM)

3.0 TB

12 x 256 GB RDIMM @ 4800 MT/s at 1 DPC

Optional Four(4) Slots

Notes:

- This optional 4 expansion slot configuration is enabled through enablement kit (P57116-B21)

- When supporting Slot1 & Slot22 scenario, Slot1 & Slot22 combined can support up to 112GB/s bandwidth due to AMD CPU limitation.

- When supporting Slot2 & Slot3 scenario, Slot2 & Slot3 combined can support up to 112GB/s bandwidth due to AMD CPU limitation.

Optional 6 slots

Primary Riser

Slots #

Technology

Bus Width

Connector Width

Slot Form Factor

1 (via Option Kit)

PCIe 5.0

X16

X16

Full-height,Half-length slot

2 (via Option Kit)

PCIe 5.0

X16

X16

Full-height,Half-length slot

3 (Default)

PCIe 5.0

X16

X16

Full-height,Half-length slot

Secondary Riser

Slots #

Technology

Bus Width

Connector Width

Slot Form Factor

4 (via Option Kit)

PCIe 5.0

X16

X16

Full-height,Half-length slot

5 (via Option Kit)

PCIe 5.0

X16

X16

Full-height,Half-length slot

6 (Default)

PCIe 5.0

X16

X16

Full-height,Half-length slot

Primary Riser

Slots #

Technology

Bus Width

Connector Width

Slot Form Factor

3 (Default)

PCIe 5.0

X16

X16

Full-height,Half-length slot

Secondary Riser

Slots #

Technology

Bus Width

Connector Width

Slot Form Factor

6 (Option)

PCIe 5.0

X16

X16

Low Profile or Full-height, half-length slot

Capacity

Configuration

Hot Plug LFF SAS HDD

400 TB

20 x 20 TB

Hot Plug LFF SATA HDD

400 TB

20 x 20 TB

Hot Plug SFF SAS SSD

261.12 TB

34 x 7.68 TB

Hot Plug SFF SATA SSD

261.12 TB

34 x 7.68 TB

Hot Plug SFF NVMe PCIe U.3 SSD

552.24 TB

34 x 15.36 TB
  • HPE SR308i-o Gen11 x8 Lanes 2GB Cache OCP Storage Controller
  • HPE SR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller
  • HPE SR932i-p Gen11 x32 Lanes 8GB Wide Cache PCI SPDM Plug-in Storage

Internal Storage Devices

Optical Drive

  • Available on 8 SFF and 8 LFF CTO Servers as an option (DVD-ROM or DVD-RW)

Drives

  • None ship standard

Maximum Internal Storage

Capacity

Configuration

Hot Plug LFF SAS HDD

400 TB

20 x 20 TB

Hot Plug LFF SATA HDD

400 TB

20 x 20 TB

Hot Plug SFF SAS SSD

261.12 TB

34 x 7.68 TB

Hot Plug SFF SATA SSD

261.12 TB

34 x 7.68 TB

Hot Plug SFF NVMe PCIe U.3 SSD

552.24 TB

34 x 15.36 TB

Graphics

Integrated Video Standard

  • Video modes up to 1920 x 1200@60Hz (32 bpp)
  • 16MB Video Memory

HPE iLO 6 on system management memory

  • 64 MB Flash
  • 8 Gbit DDR 4 with ECC protection

Serial

1 port - Optional

Video Port

1 Rear VGA Port - Standard

Network Ports

None. Choice of OCP or stand up card, supporting a wide arrange of NIC adapters

HPE iLO Remote Mgmt Port

1 Gb Dedicated

Front iLO Service Port

1 standard

USB 3.2 Gen1

5 standard on all models: 1 front, 2 rear, 2 internal

Power Supply

  • HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
  • Notes: Available in 94% Efficiency.
  • HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
  • Notes: Available in 94% Power Efficiency.
  • HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes: Available in 94% Power Efficiency.

  • HPE 1600W Flex Slot -48VDC Hot Plug Power Supply Kit

Notes: Available in 94% Power Efficiency.200-240VAC power input only.

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less installation into HPE ProLiant Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center. All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page. To review the power requirements for your selected system, please use the HPE Power Advisor Tool. For information on power specifications and technical content visit HPE Server power supplies.

Operating Systems and Virtualization Software Support for ProLiant Servers

Notes:

­ Pending VMware 7.0 U3 and VMware 8.0 certification.

­ For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server.

https://www.hpe.com/us/en/servers/server-operating-systems.html

Industry Standard Compliance

  • ACPI 6.1 Compliant
  • PCIe 5.0 Compliant
  • WOL Support
  • Microsoft® Logo certifications
  • PXE Support
  • VGA/Display Port
  • USB 3.2 Gen1 Compliant
  • USB 2.0 Compliant
  • Energy Star
  • SMBIOS 3.1
  • UEFI 2.9
  • UEFI Class 3
  • Redfish API

  • IPMI 2.0
  • Secure Digital 2.0
  • Advanced Encryption Standard (AES)
  • Triple Data Encrytion Standard (3DES)
  • SNMP v3
  • TLS 1.2
  • DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
  • Active Directory v1.0
  • European Union (EU) eco-design regulations for server and storage products, known as Lot 9, go into effect on March 1st, 2020. Among other requirements, for servers this directive establishes power thresholds for idle state, as well as efficiency and performance in active state which vary among configurations. HPE ProLiant Gen11 servers are compliant with Lot9 requirements. For more information regarding HPE Lot 9 conformance, please visit: https://www.hpe.com/us/en/about/environment/msds-specs-more.html
  • ASHRAE A3/A4

Notes: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hpe.com/servers/ashrae.

  • UEFI (Unified Extensible Firmware Interface Forum)
  • APML 1.0

Embedded Management

HPE Integrated Lights-Out (HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

Learn more at http://www.hpe.com/info/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).

Intelligent Provisioning<

HPE SERVERS

HPE Smart Choice Servers